Ashly MQX2310 2 channel Stereo 31-Band EQ with 25mm Sliders 2RU

Ashly graphic EQs utilize Wein-Bridge filters using precision components and our specially designed summing amplifiers provide extremely accurate response, low noise, negligible distortion, and excellent immunity to magnetic fields. All filters exhibit true constant"Q" response, with absolute minimum ripple.

The MQX-2310 uses the same precision filter design and summing circuitry as the GQX Series, with each filter exhibiting true constant "Q" response. The center-detented position of each fader acts as an on/off switch for its filter, ensuring absolutely flat response and high signal-to-noise ratios. A full 25 mm throw makes use of every last bit of panel space so that small panel size doesn't compromise resolution. The additional range and incredible accuracy of this fader allows for ±15 dB of amplitude adjustment on each individual filter. The MQX-2150 features two channels of fifteen-band 2/3 octave equalization and a switchable high-pass filter. The MQX-2310 features two channels of 1/3 octave EQ.

Features:

• Ashly Differentiator: +15/-15dB in 25mm Fader
• 25mm, detented metal shaft faders
• Switchable 40Hz, 18dB/octave hi-pass filter
• Tight tolerance components for precise =3% filter accuracy
• Precision Wein-Bridge filters
• Constant "Q" design
• Switchable boost/cut Range of ±6 or ±15 dB
• Signal and Clip LED
• Balanced inputs
• Servo-balanced outputs
• XLR, TRS and Euroblock connections
• Universal 100-240VAC internal power supply
• Rider-friendly
• Safety/Compliance: cTUVus, CE, FCC, RoHS

Specifications:

• Specifications Note: 0dBu = 0.775 VRMS
• Frequency Response 20Hz-20kHz, ±0.25dB
• THD <.01>
• IM Distortion (SMPTE) <.01>
• Output Hum/Noise -94dBu, Unweighted
• Channel Separation >85dB @ 1kHz
• Gain Control -8 to +6dB
• Input
• Type Active Balanced
• Impedance 20k Ohms
• Max Level +23dBu
• Connectors 1/4" (TRS), XLR, Euroblock
• Output
• Type Servo-Balanced
• Source Impedance 100 Ohms
• Min Load Impedance 600 Ohms
• Max Level +23dBu
• Connectors 1/4" (TRS), XLR, Euroblock
• Filters
• Type Constant Q / Wein-Bridge
• Number 2 x 31
• Bandwidth 1/3 Octave
• Tolerance ±3%
• Range ±6dB, ±15dB Switchable
• Subsonic Filter 18dB/Octave @ 40Hz
• Power Requirements
• Nominal Voltage 100-240VAC (50-60Hz)
• Minimal Voltage 85VAC, 30