Ansmann 1001-0004 Energy 16 Plus Rapid Charger

  • Brands Ansmann
  • Product Code: ANS-1001-0004
  • Availability: In Stock
  • $129.99


Charging and maintenance device for 1-12 AAA or AA, 1-6 C or D and 1-2 9V rechargeable batteries, automatic refreshing function, plus 2 USB charging sockets. (Batteries NOT included.)

The Energy 16 plus also boast two 5V, 1 Amp USB charging ports compatible with, iPhone, iPad, Blackberry and other 5V USB electronics. Another great thing is the smaller, "sleeker" design which takes up less counter space.

But probably the best feature can't been seen by the naked eye. The Energy 16 plus contains added circuitry for maximizing the rejuvenation of your cells, including a pre-charge cycle, which brings badly worn batteries up to a suitable voltage before recharging. And, of course the proprietary Ansmann refresh cycle is still resident in this new version with a few tweaks to fine-tune the chemistry of your batteries.

Suitable for NiMH/NiCd rechargeable batteries
Capacity quick test of the inserted cells for approx. 10 seconds:
LED green: capacity over 80% of the nominal capacity
LED orange: capacity between 25-80% of the nominal capacity
LED red: capacity under 25% of the nominal capacity
Auto-diagnosis of the inserted cells with automatic start of a pre- charging and/or refreshing process, if required, tired cells will be activated
Fast charging
Microprocessor controlled charging
Battery-full detection (-dV)
Automatic switch to trickle charge
Multiple over charging protection
Individual supervision of each cell position
Faulty cell & alkaline battery detection
Easiest handling due to fully automatic control
Clear indicators and controls for each charging position
Reverse polarity protection
For worldwide use
3 years warranty
Batteries Not Included

Features:

  • Suitable for NiMH/NiCd rechargeable batteries
  • Capacity quick test of the inserted cells for approx. 10 seconds
  • LED green: capacity over 80% of the nominal capacity
  • LED orange: capacity between 25-80% of the nominal capacity
  • LED red: capacity under 25% of the nominal capacity
  • Auto-diagnosis of the inserted cells with automatic start of a pre- charging and/or refreshing process, if required

Specifications:

  • Input voltage: 100-240V AC / 50-60Hz
  • Charging time for Mignon AA 1000mAh: 1.2h
  • Charging currents:
  • Mono D: 6x 1000mA
  • Baby C: 6x 1000mA
  • Mignon AA: 12x 1000mA
  • Micro AAA: 12x 400mA
  • 9V E-Block: 2x 60mA
  • USB: 2x 1000mA

Item Includes:

  • Charger and Power Cord only, no batteries included.

Write a review

Note: HTML is not translated!
    Bad           Good