ESE ES-993 Time Code Remote Display - Wall Mount

The ES-993U is a Time Code display featuring 2.3" high (Hours & Minutes) and 1" high (Seconds) amber LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure(5" H x 12" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-993U will automatically determine which code is being received. A rear-mounted DIP switch is used to configure the display for 12 or 24 Hour format, or to display the Date instead of time-of-day (if incoming time code contains Date information, such as ESE TC90, date-encoded SMPTE/EBU or ASCII formats "1" or "A"). If the Time Zone option is ordered, a rear-accessible DIP switch is installed for this function. If receiving ESE Time CodeT from a timer, the unit will display Minutes, Seconds and Tenths of Seconds (if the timer has the Tenths option).

Options List
(Black)Black Anodized Front panel-option availabel when standard panel is clear anodized
List: $15
NTP NTP Client Display will synchronize exclusively with an NTP server
List: $120
(TZ) Time Zone Offset via internal DIP Switch
List: $30
(UL) "UL" Approve Wall Mount Power Supply:The unit is supplied with a UL/CSA approved wall mount power supply.
List: $60
(W) 3-Wire Line Cord (2-Wire Line Cord is Standard on many units)
List: $16
(J) 220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
List: $30

Features:

• Wall Mount Display
• Reads SMPTE/EBU, ASCII & ESE Time CodeT
• Automatic Code Detection
• Six Amber LED Displays (2.3" high Hours & Minutes, 1" high Seconds)
• Viewing Distance 70'
• Switchable Between 12 & 24 Hour Format Display
• Switchable to Date display
• Optional Time Zone Offset
• NTP Option Available
• UL & 220-240 VAC options available (110-120 VAC is standard)