FSR DV-HDA-14AUD 1X4 HDMI Distribution Amplifier

DV Distribution Amps are used where a single HD source needs to feed multiple displays such as classrooms and overflow areas. The DV-HDA-14AUD is a 1 x 4 Distribution Amplifier with built-in audio de-embedder.

The DV-HAD-14AUD 1x4 HDMI Distribution Amplifier splits a single DVI or HDMI audio/video source for display on four identical outputs, supporting 1080p Full HD up to [email protected] UHD plus all 3D formats, along with multichannel digital audio formats such as Dolby True HD and DTS-HD Master Audio™. A built in audio extractor circuit decodes stereo audio from the HDMI stream, providing analog audio out on a pair of RCA connectors, while maintaining the original signal in the HDMI stream.

Applications include:
Video Wall System
Large LED Sign Board
Medical Imaging Equipment
TV Broadcast Station
Auditorium
Conference Room
Church Video System

Features:

• Supports resolutions up to [email protected], [email protected]
• Splits a HDMI source to 4 outputs without loss
• Extract the audio from HDMI source via analog outputs.
• Dolby TrueHD and DTS-HD master audio pass through on HDMI output
• Advanced EDID management for rapid
• integration of sources and displays
• LEDs for power-on, input, and outputs indication.
• Easy installation with included Under
• Table Mounting Brackets
• Small compact size
• Full 3D pass- through.
• HDCP compliant

Specifications:

• Bandwidth: 2.97Gbps per color
• Video Input Connectors: 1x HDMI Type A, 19-pin, female
• Video Output Connectors: 4x HDMI Type A, 19-pin, female
• Audio Output Connectors: 2x RCA Female
• EDID: 4-PIN DIP switch
• Mounting: Under Table Mounting Brackets included
• Dimensions (W x H x D): 7.72" (196mm) x 3.15" (80mm) x 0.87" (22mm)
• Shipping Weight: 0.88 lbs. (0.4kg
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Storage Temperature: -4°F to 140°F (-20°C to 60°C)
• Power Requirements: 12VDC/0.5A

Item Includes:

• DV-HDA-14AUD 1x4 HDMI Distribution Amplifier
• 12VDC 1A Power Supply with locking connector
• Under Table Mounting Brackets
• Stick on feet that can be used in place of the pre-installed feet that may be included on some of the units. Users can remove the existing feet (4) held by one screw, and use the low profile stick on feet that are included.
• User's Manual