Ensemble BrightEye 83-F HDMI to Optical and Electrical 3G/ HD/ SD SDI Converter

  • $600.00


Convert HDMI to HD or SD SDI with the BrightEye 83-F. Convenient for broadcast video cameras and other sources with an HDMI output. BrightEye 83-F presents both electrical and optical serial digital outputs.

The optical output can drive single mode fiber to a distance of 20 kilometers. With an optical launch power attenuator, multi-mode fiber can also be used.

BrightEye 83-F is for use with standard definition video signals and 3 Gb/s and 1.5 Gb/s high definition signals. Signal monitoring and control is provided through the included BrightEye Mac and BrightEye PC software.

In compliance with the licensing restrictions on HDCP encrypted material, BrightEye 83-F cannot convert encrypted signals to SDI form.

Power supply is included

Features:

  • HDMI to Optical and Electrical Converter
  • Use with Cameras and Other Sources that have an HDMI Output
  • Passes Embedded Audio

Specifications:

  • Input:
  • Number One
  • Type HDMI 1.3, Type C connector
  • Format Supports HDMI signals which map to the video standards listed below

  • SDI Standards Supported:
  • 1080i (SMPTE 274M -4,5,6) 50, 59.94 or 60 Hz
  • 720p (SMPTE 296M -1,2,3) 50, 59.94 or 60 Hz
  • 1080p (SMPTE 274M -9,10,11) 23.98, 24, 25 Hz
  • 1080sF (RP211 -14,15,16) 23.98, 24, 25 Hz
  • 1080p (SMPTE 424M, 425M), 50, 59.94, 60, Level A
  • 525i, 625i (SMPTE 259M)

  • Serial Digital Output:
  • Number Two, BNC
  • Type Follows Input
  • Impedance 75 U
  • Return Loss >15 dB to 1.485 GHz
  • >10 dB to 2.97 GHz
  • Output DC None (AC coupled)

  • Optical Output (BE83-F Only):
  • Number One, LC/UPC
  • Type Follows Input
  • Wavelength 1310 nm (non-CWDM)
  • Wavelengths 170 nm -1610 nm at 20 nm CWDM spacing available.
  • Call factory for price and specify part number BE83-F-SP.
  • Power -7 dBm
  • Max Cable Length 20 km (For greater distances, or higher power and larger loss budgets,
  • please contact the factory
  • Fiber Type Single Mode
  • Multi-mode compatible with attenuation at transmit end

  • General Specifications:
  • Size 5.625" W x 0.8" H x 5.5" D (143 mm x 20 mm x 140 mm)
  • including connectors
  • Power 12 volts, 5 watts
  • Temperature Range 0 to 40° C ambient
  • Relative Humidity 0 to 95° non-condensing

Write a review

Note: HTML is not translated!
    Bad           Good