Artel XA-1900-C1S IRIG 850nm Fiber Optic Card-ST Connector-Multimode

The Artel XA/RA-1900A and XR-1900 fiber optic systems are ideal for applications used in military and aerospace industries, transmitting IRIG and similar NASA and NBS standard instrumentation time-code formats over standard multimode or singlemode fiber at 850 nm or 1310 nm.

Features:

• Transmits IRIG and similar NASA and NBS standard instrumentation time-code formats up to 100 kHz
• Combinations of three different units may be configured to provide point-to-point, point-to-multipoint
• Built-in regulated power supplies allow operation from unregulated AC or DC sources
• Transmits at 850 nm or 1310 nm over standard multimode or singlemode fiber
• XA/RA-1900 cards fit the 6000A card cage

Specifications:

• Data
• Number of Channels: 1
• Number of Outputs per Channel: 1
• IRIG Compatibility: A through H
• System Bandwidth (+0, -3 dB): 20 Hz to 100 kHz
• Input/Output Load Impedance: 600 Ohms nominal
• Input/Output Signal Voltage: 1 volt rms
• Signal/Noise Ratio: 67 dB typical
• Noise Floor (full bandwidth): 1.3 mv rms maximum
  
  General
• Number of Fibers: 1 fiber
• Operating Temperature: -20° to +60° C
• Operating Power (per unit): +15 to +25 volts DC at 250 mA or 14 to 18 volts AC, 50/60 Hz
• Dimensions: 5 W x 1.25 H x 2.5 L (inches)
• Weight: Approx. 1 lb;
• Optical Connectors: ST: Multimode
• Optical Wavelength: 850 nm
• Optical Fiber: 50 or 62.5 micron multimode fiber
• System Delay:
• MTBF: 181,000 hours
  
  Operating Loss Budget and Maximum Usable Distance
• Wavelength: 850 NM
• Loss (dB): 0 - 10 dB
• Distance (km): 0-3.5 (62.5u)