Leader LV7300-SER25 Multi SDI Zen Rasterizer adding Focus Assist-High Sensitivty

LV7300-SER25 adds Focus assist function for LV7300-SER01 or LV7300-SER02

Leader LV7300-SER25 is a focus detection function realizing a new algorithm based on nonlinear super resolution technology. The focus can be detected with high sensitivity even with low-contrast images, which were conventionally difficult to detect. In addition, sensitivity can be selected from 5 levels according to the video scene.

Features:

• Supports various signal inputs
• Various SDI signals up to 12 G-SDI can be observed/monitored.
• Audio signals can correspond to SDI embedded voice.
• Excellent operability
• With the front panel equipped with key buttons and knobs that follow the operability of conventional models, operation with a
• USB mouse is also possible. In addition, the LV5300/LV5350 adopt a 7-inch full HD panel with a touch panel function, and the LV7300 can be operated and set intuitively by touch operation by connecting an external LCD adopted touch panel with a USB cable
• SDI input format
• SD-SDI, HD-SDI, 3G-SDI, 12G-SDI Single Link is supported

Specifications:

External Synchronize Input Terminal
• Input terminal: BNC terminal
• Number of input terminals: 1 line 2 terminals
• Input impedance: 15 kΩ Passive loop through
• Input return loss: 30 dB or more (50 kHz to 30 MHz, 75 Ω termination)
• Maximum input voltage: ± 5 V (DC + peak AC)
• Input signal: Ternary synchronization signal or NTSC/PAL black burst signal; 10 Field ID correspondence
• Function: SDI reference signal input for video signal waveform display and phase difference display
  
  Headphone Output Terminal
• Output terminal: Standard jack 1 terminal (stereo)
• Output signal: On the screen of the displayed audio signal, arbitrary 2 ch (Downmixed Lt, Rt is also acceptable)
  
  SDI Output Terminal
Function Output screen for SDI monitor
• Output terminal: BNC terminal
• Number of output terminals: 1
• Output signal: Output liquid crystal display screen is output with HD, 3G-A, 3G-B-DL. 1920x1080 60, 59.94, 50 I/P, YCBCR 4:2:2 (10 bits)
  
  TMDS Output Terminal
Function The displayed screen is output for HDMI monitor.
• Output terminal: HDMI terminal
• Number of output terminals: 1
• Signal format: Single Link T.M.D.S
• DDC function: Not supported
• HOT PLUG detection function: Not supported
• Output signal: Output liquid crystal display screen is output. 1920x1080 60 P, 59.94 P, 50 P
  
  Control Terminal
USB terminal
• Terminal shape: Standard A
• Number of terminals: 2
• Standard USB 2.0
• Compatible device USB memory, USB mouse, touch panel type monitor
  
  For Ethernet Terminal Control
• Approved standard: IEEE802.3
• Supported protocols:TELNET, FTP, SNMP, HTTP, SNTP
• Input/output terminals: RJ-45
• Function: Remote operation with an external PC or remote controller, File transfer, get status information
• Types: 10Base-T, 100Base-TX, 1000Base-T
  
  Remote Terminal
• Terminal shape: D Sub 15 pins (female)
• Number of terminals: 1
• Control signal: LV- TTL level (LOW active)
• Function Preset: recall, input signal switching, alarm output, tally
• Alarm output: When a format alarm, various errors, fan abnormality, or internal temperature occurs
  
  General Specifications
• Operating temperature range: 32°F - 104°F
• Operating humidity range: 85% RH or less (with no condensation)
• Performance guarantee temperature range: 50°F - 86°F
• Usage environment: Indoors
• Usable altitude: up to 2,000m
• Overvoltage category: 1
• Pollution degree: 2
• Power supply: Voltage DC 10V - 18V
• Dimensions(HxWxD): 1.7" x 8.3" x 11.8"