Teradek BEAM 572 Low Latency Long Range HD-SDI Video Receiver

The Teradek Beam is a full HD camera-back H.264 encoder, capable of delivering stunning video at bit rates up to 50Mbps.* Beam utilizes the unlicensed 5GHz band and can transmit video up to 2500ft with just 2 frames of latency. Whether the job requires a wireless link back to the OB Van or an MPEG-TS stream back to the station, Beam gives broadcasters unparalleled flexibility in the field.

*Transmitting above 30Mbps requires using the LAN port.

Function Design 
With a 3G-SDI input and your choice of AB- or V-mount battery plates, Beam seamlessly integrates with all popular professional cameras. The chassis also includes an OLED screen for quick configuration, LAN port for broadcasting over wired networks, and a bidirectional serial port for camera control.

Professional Features 
Beam is multicast capable to up to 4 receivers and includes a dedicated bidirectional IFB channel, which allows a news operations center to speak directly to the camera operator in the field. Beam also supports high power transmission on the 5.15 ~ 5.25GHz band in accordance with FCC regulations. This means that your wireless video feed will be more resilient and get better range.

Protocol Support 
Beam is compatible with the RTSP and MPEG-TS protocols, giving broadcasters the ability to transmit video over the Internet to a Beam decoder or directly to computers at very high bit rates. The Beam decoder can also act as an RTSP server, which will re-stream your video feed directly to a local computer.

Specifications:

• Video Compression H.264 Baseline Profile Level 4.2 with de-interlacing
• System Latency 90 - 110 millisecond delay between Transmitter and Receiver
• Wireless range 2500ft +- 200ft
• Digital Video In/Out SD-SDI, HD-SDI, 3G-SDI
• Video Port TX: SDI input and looped Output, RX: SDI output
• Supported Video Resolutions SMPTE244 480i59.94 (NTSC), 480i60 (861-D)
• IEC61179-5 576i50 (PAL)
• SMPTE 296M 720p23.98, 720p24, 720p25, 720p29.97, 720p30, 720p50, 720p59.94, 720p60
• SMPTE 274M 1080i50, 1080i59.94, 1080i60, 1080PsF23.98,1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
• SDI Compliance SMPTE 259M BI.656 SDTV Digital Signal/Data Serial Digital Interface
• SMPTE 292M BT.1120 1.5Gb/s Signal/Data Serial Digital Interface
• SMPTE 425M (option) 3Gbis Signal/Data Serial Digital Interface
• SMPTE 299M 16bit Digital Audio Format for SMPTE 292M
• SMPTE 352M Video Payload Identification for Digital Interfaces
• Bitrate RTSP Server Up to 30Mbps
• MPEG2-TS Server Up to 15Mbps
• Main Digital Audio In/Out TX/RX SDI embedded audio: 48kHz 16-bit stereo linear PCM
• Main Analog Audio Out RX 48kHz 16-bit stereo linear PCM with mini stereo phone output jack
• Talk-Back Analog Audio In/Out RX/TX 8kHz 16-bit stereo linear PCM with mini stereo phone input/output jack
• Radio Power Aggregate Power: 150mW (22dBm), 50mW (17dBm)/antenna
• Radio standard IEEE 802.11a/n: OFDM
• Frequencies U-NII-1 (5.15-5.25 GHz), U-NII-3 (5.725-5.85 GHz)
• Antenna 3T x 3R MIMO, 3 antennas per WiMi6200TW/W1Mi6200RW
• Security 802.1x, 802,11i, WPA2, WPA and WEP 64/128 TKIP 128bit AES
• WPS Wireless Protected Setup for easy set up and security configuration
• Ethernet LAN 10/100 BASE-TX, RJ-45 jack
• Multicast WiFi: Up to 4 Receivers
• LAN: No limit on number of receivers
• External Control Full duplex RS422 serial port
• USB Factory reset, IP configuration or firmware upgrade without PC
• Power Input/Consumption DC 7V-17V, 12 Watt
• Dimensions (H x W x D) (mm) 170 x 105 x 28 each board assembly (TX or RX)
• Weight (g) TX: 990g
• RX: 610g
• Operating Temperature 0 deg C to 50 deg C