• Your shopping cart is empty!

6301FE Non-Paired 18 AWG Stranded -Shielded Audio System Cable - 500 Foot

  • $170.35


0 reviews / Write a review

18 AWG bare copper conductors, Flamarrest insulation, conductors cabled, Overall Beldfoil tape shield (foil side out) and drain wire,Flamarrest jacket with ripcord, sequential footage marking every two feet.

Specifications:

  • Suitable Applications Security Systems, Intercom/PA Systems, Sound/Audio Systems,
  • Power Limited
  • Controls
  • PHYSICAL CHARACTERISTICS:
  • CONDUCTOR:
  • Number of Conductors 3
  • Total Number of Conductors 3
  • AWG 18
  • Stranding 7x26
  • Conductor Material BC - Bare Copper
  • INSULATION:
  • Insulation Material Trade Name Flamarrestr
  • Insulation Material LS PVC - Low Smoke
  • Polyvinylchlorid
  • Nom. Insulation Wall Thickness .009 in.
  • OUTER SHIELD:
  • Outer Shield Material Trade Name Beldfoil
  • Outer Shield Type Tape
  • Outer Shield Material Aluminum Foil-Polyester Tape w/Shorting Fold
  • Outer Shield %Coverage 100 %
  • Outer Shield Drain Wire AWG 20
  • Outer Shield Drain Wire Stranding 7x28
  • Outer Shield Drain Wire Conductor Material TC - Tinned Copper
  • OUTER JACKET:
  • 6301FE Non-Paired - Commercial Audio Systems
  • Outer Jacket Material Trade Name Flamarrest
  • Outer Jacket Material LS PVC - Low Smoke
  • Polyvinyl Chloride
  • Outer Jacket Nominal Wall Thickness .015 in.
  • Outer Jacket Ripcord Yes
  • OVERALL NOMINAL DIAMETER:
  • Overall Nominal Diameter .172 in.
  • MECHANICAL CHARACTERISTICS:
  • Operating Temperature Range 0DegreesC To +75Degrees
  • UL Temperature Rating 75DegreesC
  • Bulk Cable Weight 28.1 lbs/1000 ft.
  • Max. Recommended Pulling Tension 81.2 lbs.
  • Min. Bend Radius (Install) 1.75 in.
  • APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE:
  • APPLICABLE STANDARDS:
  • NEC/(UL) Specification CMP
  • NEC Articles 800
  • CEC/C(UL) Specification CMP
  • EU CE Mark (Y/N) Yes
  • EU RoHS Compliant (Y/N) Yes
  • EU RoHS Compliance Date (mm/dd/yyyy): 04/01/2005
  • FLAME TEST:
  • UL Flame Test NFPA 262
  • C(UL) Flame Test FT6
  • PLENUM/NON-PLENUM:
  • Plenum (Y/N) Y
  • Non-Plenum Number 5301FE
  • ELECTRICAL CHARACTERISTICS:
  • Nom. Capacitance Conductor to Conductor @ 1 KHz 70 pF/ft
  • Nom. Cap. Cond. to Other Cond. & Shield @ 1 KHz 126 pF/ft
  • Nom. Conductor DC Resistance @ 20 Deg. C 6.4 Ohms/1000 ft
  • Nominal Outer Shield DC Resistance @ 20 Deg. C 7.6 Ohms/1000 ft
  • Max. Operating Voltage - UL 300 V RMS
  • Max. Recommended Current 5 Amps per conductor @ 25DegreesC

Write a review

Note: HTML is not translated!
    Bad           Good